Email Sales
(214) 221-5544
1-800-687-2220
(214) 340-7500Mold Releases
Mold release agents maximize productivity, help shorten mold cycle times, and help lengthen mold life. Slide’s aerosol spray mold release agents, applied properly to the mold surface, easily releases a variety of plastic resins. Mold release agents are available as aerosol sprays and bulk liquids, and are available in a variety of formulations, including NSF approved, to meet your specific molding application. Slide's releases include formulations for engineered resins, thermosets, epoxies, and deep draw molding. Slide has light duty, heavy duty, NSF approved releases, release for food applications, paintable, non-silicone, specialty releases and mold releases and investment casting.
EconoMIST Mold Release Spray (No. 41612N)
- Solvent-free dry formulation
- NSF category M1
- Light-duty silicone release
- Recognized by UL
- Maximum operating temp: 600°F/315°C
- Reviewed and Approved by Health Canada
Paintable Mold Release Agent (No. 40012N)
- Solvent-free dry formulation
- Light-duty
- Recognized by UL
- Allows molded parts to be painted or decorated post-molding
- Maximum operating temp: 650°F/343°C
Pure Eze Mold Release Agent (No. 45712N)
- Solvent-free dry formulation
- Food-grade active ingredient (†††)
- Recognized by UL
- Neutral white oil-based release; does not contain lecithin
- Won’t turn color or turn rancid
- Paintable, non-silicone
- Excellent all-purpose mold release for use with most resins
- Maximum operating temp: 600°F/315°C
Knock Out Mold Release Agent (No. 46612N)
- Solvent-free dry formulation
- Paintable, non-silicone
- Approved for indirect food contact (†)
- Maximum operating temp: 450°F/232°C
Econo-Spray® 1 Mold Release Spray (No. 40510P)
- No chlorinated solvents
- Non-paintable silicone
- Food-grade for indirect food contact (†)
- Recognized by UL
- Safe to use on most resins
- Maximum operating temp: 600°F/315°C
Econo-Spray® 2 Mold Release Spray (No. 40710P)
- No chlorinated solvents
- Paintable; permits post-decorating of molded parts without prior cleaning
- Maximum operating temp: 650°F/343°C
Econo-Spray® 3 Mold Release Spray (No. 40810P)
- No chlorinated solvents
- Non-silicone and paintable
- Food-grade active ingredient (†)
- Maximum operating temp: 600°F/315°C
Urethane Mold Release Agent (No. 45812H)
- Solvent-free dry formulation
- Non-paintable silicone mold release
- Maximum operating temp: 500°F/260°C
- Effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams
Silicone Mold Release Agent (No. 40112)
- Solvent-free dry formulation
- Food-grade for indirect food contact (†)
- Allows for faster molding & more production
- Recognized by UL
- Recommended for food-packaging molding
- Maximum operating temp: 600°F/315°C
DFL Dry Film Lube Mold Release Agent (No. 41112N)
- No chlorinated solvents
- Formulated for deep draw molds
- Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
- Use it on phenolic & urethane resins
- Contains PTFE
- Maximum operating temp: 500°F/260°C
SSL Mold Release Agent (No. 42112N)
- Solvent-free dry formulation
- NSF category M1
- Recognized by UL
- Low-cost heavy-duty mold release
- Maximum operating temp: 600°F/315°C
Zinc Stearate Mold Release Agent (No. 41012N)
- No chlorinated solvents
- Paintable, non-silicone
- Mold release powder
- Use for polycarbonate, polypropylene, polysulfone and rubber molding
- Maximum operating temp: 600°F/315°C
Epoxease Mold Release Agent (No. 40614)
- No chlorinated solvents
- Non-silicone, synthetic wax-based product
- For injection molding, encapsulating, potting
- For epoxy, polyester and phenolic resins
- Maximum operating temp: 450°F/232°C
Heavy-Duty 10% Mold Release Agent (No. 54912)
- Solvent-free dry formulation
- Paintable, non-silicone
- Food-grade for indirect food contact (†)
- Slide’s heaviest-duty mold release
- Maximum operating temp: 450°F/232°C
Quick Silicone Mold Release Agent (No. 44612)
- No chlorinated solvents
- Recognized by UL
- Food-grade for indirect food contact (†)
- Fast-drying on cold and hot molds
- Maximum operating temp: 600°F/315°C
Quick Paintable Mold Release Agent (No. 44712)
- No chlorinated solvents
- Recognized by UL
- Paintable
- Fast-drying on cold and hot molds
- Maximum operating temp: 650°F/343°C
Quick Lecithin Mold Release Agent (No. 44812)
- No chlorinated solvents
- Paintable, non-silicone
- Food-grade active ingredient (††††)
- Fast-drying on cold and hot molds
- Maximum operating temp: 500°F/260°C
Polycarbonate Mold Release Agent (No. 41412)
- Solvent-free dry formulation
- Paintable release, will not interfere with post-molding decorating of parts
- Specifically developed as a release for polycarbonate resin
- Recognized by UL
- Maximum operating temp: 650°F/343°C
Universal Mold Release Agent (No. 42612)
- Solvent-free dry formulation
- Paintable, non-silicone
- Food-grade active ingredient (†††)
- Contains no lecithin
- Safe to use on most thermoplastics
- Recognized by UL
- Use where parts must be painted, hot-stamped or metalized
- Maximum operating temp: 600°F/315°C
E/S Silicone Mold Release Agent (No. 44312)
- No chlorinated solvents
- Approved for indirect food contact (†)
- Water-based formulation
- Use on molds 212°F/100°C and above
- Maximum operating temp: 600°F/315°C
Thermoset Mold Release Agent (No. 45414)
- No chlorinated solvents
- Made with synthetic carnauba wax
- Contains no silicones or oils
- Recommended for thermoset plastic resins
- Ideal release for injection, compression and transfer molding
- Maximum operating temp 600°F/315°C
Hi-Temp 1800 Mold Release Agent (No. 44110A)
- No chlorinated solvents
- Paintable, non-silicone release contains boron nitride
- Effective release for engineering grade resins, low melting point metals and glass
- Maximum operating temp: 1800°F/982°C
- Recommended for use with Ultem and other engineering-grade resins
Water Soluble Mold Release Agent (No. 41212N)
- Solvent-free dry formulation
- Paintable, non-silicone mold release
- Permits ultrasonic welding of parts
- Simply wash parts in water to clean
- Does not contain water
- Offers anti-static properties to the molded part
- Maximum operating temp: 450°F/232°C.
Mold Saver Mold Release Agent (No. 42510P)
- No chlorinated solvents
- Neutralizes corrosive vapors and prevents resin deposit build-up
- Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives
- Paintable, non-silicone release
- Maximum operating temp: 550°F/287°C